Choose Your Dive Mode Display
The Veo 1.0 Dive Computer is as versatile underwater as it is topside. Upon starting your
dive, the Veo 1.0 will simply display your current depth and how long you
can stay there (Dive Time Remaining). While many divers have asked for such
simplicity and ease of use, you know that with all the Veo 1.0 features,
there must be more. And there is. Simply press the button to see more information.
Is this information important to you on a full time basis? Leave it there. Just
want to check it and then move on to another display? You can do that too. It's
up to you and your new Veo 1.0.
Dive Time Remaining
Dive Time Remaining provides a 'real' number in minutes, considering Nitrogen
absorption, and automatically displays time.
Oversized Digits
Take the Oceanic challenge: When shopping for a new dive computer, compare the
displays. When it comes to viewing critical information, which would you rather
see at 100 feet?
"Hockey Puck" Modular
Design Allows easy upgrade from most analog gauge or computer consoles.
This innovative modular design allows versatile configurations from our Swiv
Combo or NavCon consoles, wrist mount, hose-mount boot, or a retractor attached
to your BC. Air or Nitrox
The Veo 1.0 Dive computer acts simply as an 'Air' computer until you tell it otherwise,
whether that is this weekend or 2 years down the road.
Safety Stop Prompt with Adjustable Depth and Time
An automatic visual prompt reminds you as you approach your programmed no decompression
safety stop depth and an automatic timer counts down to zero. As in any other
dive mode, you still have access to other pieces of information, and there is
no penalty should you choose to disregard the safety stop.
Time Stamp
The Veo 1.0 Dive Computer features time of day on the surface as well as underwater for
quick reference.
Automatic Altitude Compensation
The Veo 1.0 automatically compensates for altitude dives up to 14,000 feet,
giving adjusted no-decompression times and depths. The Veo 1.0 even automatically
recalibrates the depth displays for freshwater instead of seawater above 2,000
feet.
Diver-Replaceable Batteries
The Veo 1.0 dive Computer features a diver replaceable battery. This can be a real trip-saver
on board a live-aboard boat!
Battery Hot Swap
Should you be in a tight spot between dives, the "hot-swap" feature allows you
to change batteries between dives while maintaining all calculations.
24-Hour Fly Countdown and Calculated
Desaturation Time
The Veo 1.0 features both a 24-hour countdown timer and calculated Desaturation
Time, the theoretical time required to off-gas all residual nitrogen at sea
level.
Depth-Dependent Ascent Rate
The Veo 1.0 features a depth-dependant ascent rate, allowing increased rates
at deeper depths and providing additional safety as you near the surface.
12 Dive On-Unit Log Book
The Veo 1.0 features on-unit data storage capacity for 12 dives. Dive numbering
and time stamp makes locating and viewing a specific dive quick and easy.
Gauge Mode
Divers using advanced breathing gas may utilize the Veo 100 Nx as an advanced
air integrated digital depth gauge and bottom timer with detailed PC Interface.
User Settings and Options
Water Activation On/Off
The Veo 1.0 Dive Computer automatically enters Dive Mode when the water contacts are wet,
and the unit is submerged past 4 feet. To avoid this when swimming or enjoying
other water sports, simply set Water Activation Off.
Units of Measurement Choose between Metric and Imperial settings for date, temperature, depth and pressure. |